Follow us:

Products

Hotline
Download

Promo® 2000 HP

With automatic regulation of the sampling flow through the welas® aerosol sensors at an overpressure of 2 to 10 bar or in temperatures up to 120 °C

    Measuring range of 0.2 to 100 µm (4 measuring ranges selectable in one device)
    Up to four measuring ranges in only one device:
      -   0,2 µm – 10 µm
      -   0,3 µm – 17 µm
      -   0,6 µm – 40 µm
      -   2 µm – 100 µm (additionally for sensors 2300 and 2500)
    Up to 128 size channels per measuring range
    Concentration range of 1 particle/cm3 to 106 particles/cm3
    Calibration curves for different refractive indices
    Very high and reproducible counting efficiency rate starting at 0.2 µm
    Pressure-resistant up to 10 bar (optional)
    Heatable to 250 °C (optional)
    Optical fibre technology
    Simple operation with a large touch display
    Calibration, cleaning and lamp replacement can all be performed independently by the customer
    External control by RS 232 or Ethernet
    With analysis software PDAnalyze
    Optional: Software PDControl for operation as welas® digital available
    Low maintenance
    Reliable function
    Reduces your operating expenses

Description

Depending on the composition of the aerosol to be measured, i.e. the carrier gas component and the particle material, pressure and temperature changes in the carrier gas can significantly influence the particle size distribution, e.g. due to condensation or evaporation.

For this reason, the welas® aerosol sensors welas® 2070 HP, 2100 HP, 2200 HP, 2300 HP and welas® 2500 HP are equipped with a cuvette heatable up to 120 °C and pressure-tight up to 10 barg to ensure isobaric and isothermal sampling into the sensor’s measurement volume.

The Promo® is usually calibrated for the operating volume flow. As the operating volume flow changes with pressure and temperature, it is advantageous for the user if automatic volume flow regulation for the sampling volume flow is provided for in the device.

In the Promo® 2000 HP the pressure and temperature of the carrier gas are measured and the required operating volume flow is automatically set to 5 l/min.

Includes:
    Mass flow controller for volume flow regulation
    Heating regulator up to 120 °C
    Temperature sensor
    Absolute pressure capsule
    Filter unit

Datasheet

Interfaces

USB, Ethernet, RS232/485, Wi-Fi

Measurement range (size)

0,2 µm – 10 µm,
0,3 µm – 17 µm,
0,6 µm – 40 µm,
2 µm – 100 µm

Size channels

up to 128 (64/decade)

Measuring principle

Optical light-scattering

Measurement range (number CN)

< 1 • 106 particles/cm3

Volume flow

5 l/min

Data acquisition

20 MHz processor, 256 raw data channels, digital

Light source

Xenon arc lamp 35 W

Power consumption

100 W

User interface

Touch screen, 800 • 480 pixel, 7"

Housing

Table housing, optionally with mounting brackets for rack-mounting

Dimensions

185 • 450 • 315 mm (H • W • D) (19")

Support options

Direct remote access, Palas® webserver service

Weight

approx. 8 kg (control unit), approx. 2.8 kg (sensor)

Operating system

Windows embedded

Data logger storage

4 GB Compact Flash

Software

PDControl, FTControl, PDAnalyze

Installation conditions

+5 – +40 °C (control unit)

Benefits

    Measuring range of 0.2 to 100 µm (4 measuring ranges selectable in one device)
    Up to four measuring ranges in only one device:
      -   0,2 µm – 10 µm
      -   0,3 µm – 17 µm
      -   0,6 µm – 40 µm
      -   2 µm – 100 µm (additionally for sensors 2300 and 2500)
    Up to 128 size channels per measuring range
    Concentration range of 1 particle/cm3 to 106 particles/cm3
    Calibration curves for different refractive indices
    Very high and reproducible counting efficiency rate starting at 0.2 µm
    Pressure-resistant up to 10 bar (optional)
    Heatable to 250 °C (optional)
    Optical fibre technology
    Simple operation with a large touch display
    Calibration, cleaning and lamp replacement can all be performed independently by the customer
    External control by RS 232 or Ethernet
    With analysis software PDAnalyze
    Optional: Software PDControl for operation as welas® digital available
    Low maintenance
    Reliable function
    Reduces your operating expenses

Applications

    Emission monitoring of installations
    Control of grinding and classification processes
    Monitoring of production processes in the food, pharmaceuticals and chemicals industries
    Testing of complete filters, inertial and wet separators or electrostatic precipitators