Follow us:

Products

Hotline
Download

RBG 2000 D

Pressure-resistant at positive pressure values of up to 3 bar, higher mass flows

•    Pressure-resistant at positive pressure values of up to 3 bar
•    Optimal short-term and long-term dosing constancy
•    Double the dosing time in comparison with the RBG 1000
•    Disperses virtually any non-cohesive dusts
•    Easy to switch out different solid material reservoirs and dispersion covers
•    Easy to determine and adjust the mass flow
•    Able to adjust higher mass flows than the RGB 1000
•    Pulse mode
•    Easy to clean
•    Quick and easy to operate
•    Reliable function
•    Low maintenance
•    Reduces your operating expenses

Description

This device disperses particles at positive pressure values of up to 3 bar.

Please note: The 16-, 20-, and 28-mm solid material reservoirs are pressure-resistant; the 32-mm solid material reservoir is not pressure-resistant. The solid material reservoir with a diameter of 32 mm is able to be used in the RBG 2000 D exclusively under atmospheric conditions.

Nitrogen cannot be used as the dispersing gas in the pressure-resistant version of the RBG 2000.


Table 1: Mass flows of RBG system (compacted density 1 g/cm3)

Table 2: Dispersion covers

Table 3: Different versions of the RBG system

I = version for inhalation
D = pressure-resistant
G = low feed rate
L = easily removable and weighable dosing unit
S = nitrogen version

Datasheet

Volume flow

2.5 – 5.0 m3/h

Power supply

115/230 V, 50 – 60 Hz

Dimensions

1,160 • 530 • 500 mm (H • W • D)

Weight

approx. 40 kg

Particle material

Non-cohesive powders and bulks

Dosing time

Several hours nonstop

Maximum particle number concentration

ca. 107 particles/cm3

Mass flow (particles)

1 – 560 g/h (with an assumed compacted density of 1 g/cm3)

Particle size range

0.1 – 100 µm

Carrier/dispersion gas

Air

Pre-pressure

4 – 8 bar

Feed rate

5 – 700 mm/h

Reservoir diameter

16, 20, 28 mm

Maximum counter pressure

up to 3 barg overpressure

Reservoir length

180 mm

dispersion cover

Type A, type D

Compressed air connection

Quick coupling

Aerosol outlet connection

Dispersion cover type A: Øinside= 5 mm, Øoutside = 8 mm; Dispersion cover type D: Øinside= 5 mm, Øoutside = 8 mm

Filling quantity

36 g (reservoir Ø = 16 mm), 56 g (reservoir Ø = 20 mm), 110 g (reservoir Ø = 28 mm), 144 g (reservoir Ø = 32 mm)

Benefits

•    Pressure-resistant at positive pressure values of up to 3 bar
•    Optimal short-term and long-term dosing constancy
•    Double the dosing time in comparison with the RBG 1000
•    Disperses virtually any non-cohesive dusts
•    Easy to switch out different solid material reservoirs and dispersion covers
•    Easy to determine and adjust the mass flow
•    Able to adjust higher mass flows than the RGB 1000
•    Pulse mode
•    Easy to clean
•    Quick and easy to operate
•    Reliable function
•    Low maintenance
•    Reduces your operating expenses

Applications

•    Alle Anwendungen druckfest bis 3 bar Überdruck
•    Testen von Druckluftfiltern
•    Filter industry
      -   Determination of fractional separation efficiency
      -   Determination of total separation efficiency
      -   Long-term dusting
      -   Filter media and assembled filters
      -   Dust filters
      -   Vacuum cleaners and vacuum filters
      -   Car interior filters
      -   Engine air filters
•    Calibrating particle measurement devices
•    Flow visualization
•    Inhalation experiments
•    Tracer particles for LDV, PIV, etc.
•    Surface coatings