Follow us:

Products

Hotline
Download

welas® digital 2000 HP

With automatic regulation of the sampling flow through the welas® aerosol sensors at an overpressure up to 10 bar or in temperatures up to 120 °C

•    Measuring range of 0.2 to 100 µm (4 measuring ranges selectable in one device)
•    Up to four measuring ranges in only one device:
      -   0,2 µm – 10 µm
      -   0,3 µm – 17 µm
      -   0,6 µm – 40 µm
      -   2 µm – 100 µm (additionally for sensors 2300 and 2500)
•    Up to 128 size channels per measuring range
•    Concentration range of 1 particle/cm3 to 106 particles/cm3
•    Calibration curves for different refractive indices
•    Very high and reproducible counting efficiency rate starting at 0.2 µm (see Graph 2)
•    High temporal resolution down to 10 ms
•    Optical fibre technology
•    Measurement in potentially explosive environment
•    Long service life of the light source of 2000 h
•    Extensive PDControl and FTControl software
•    Simple operation
•    Calibration, cleaning and lamp replacement can all be performed independently by the customer
•    Low maintenance
•    Reliable function
•    Reduces your operating expenses

Description

Depending on the composition of the aerosol to be measured, i.e. the carrier gas component and the particle material, pressure and temperature changes in the carrier gas can significantly influence the particle size distribution, e.g. due to condensation or evaporation.

For this reason, the welas® aerosol sensors welas® 2070 HP, 2100 HP, 2200 HP, 2300 HP and welas® 2500 HP are equipped with a cuvette heatable up to 120 °C and pressure-tight up to 10 barg to ensure isobaric and isothermal sampling into the sensor’s measurement volume.

The welas® digital is usually calibrated for the operating volume flow. As the operating volume flow changes with pressure and temperature, it is advantageous for the user if automatic volume flow regulation for the sampling volume flow is provided for in the device.

In the welas® digital 2000 HP the pressure and temperature of the carrier gas are measured and the required operating volume flow is automatically set to 5 l/min.

Includes:
•    Mass flow controller for volume flow regulation
•    Heating regulator up to 120 °C
•    Temperature sensor
•    Absolute pressure capsule
•    Filter unit

Datasheet

Interfaces

USB
Measurement range (size)

0.2 µm – 10 µm,
0.3 µm – 17 µm,
0.6 µm – 40 µm,
2 µm – 100 µm
Size channels

up to 64/decade
Measuring principle

Optical light-scattering
Measurement range (number CN)

< 1 • 106 particles/cm3
Thermodynamic conditions

≤ 120°C, ≤ 10 bar
Volume flow

5 l/min
Data acquisition

20 MHz processor, 256 raw data channels, digital
Light source

Xenon arc lamp 35 W
User interface

Laptop
Power supply

115/230 V, 50/60 Hz
Housing

Table housing, optionally with mounting brackets for rack-mounting
Dimensions

185 • 450 • 315 mm (H • W • D) (19")
Weight

approx. 18 kg (control unit), approx. 2.8 kg (sensor)
Software

PDControl, FTControl
Installation conditions

+5 – +40 °C (control unit)

Benefits

•    Measuring range of 0.2 to 100 µm (4 measuring ranges selectable in one device)
•    Up to four measuring ranges in only one device:
      -   0,2 µm – 10 µm
      -   0,3 µm – 17 µm
      -   0,6 µm – 40 µm
      -   2 µm – 100 µm (additionally for sensors 2300 and 2500)
•    Up to 128 size channels per measuring range
•    Concentration range of 1 particle/cm3 to 106 particles/cm3
•    Calibration curves for different refractive indices
•    Very high and reproducible counting efficiency rate starting at 0.2 µm (see Graph 2)
•    High temporal resolution down to 10 ms
•    Optical fibre technology
•    Measurement in potentially explosive environment
•    Long service life of the light source of 2000 h
•    Extensive PDControl and FTControl software
•    Simple operation
•    Calibration, cleaning and lamp replacement can all be performed independently by the customer
•    Low maintenance
•    Reliable function
•    Reduces your operating expenses

Applications

•    Determination of the separation efficiency of car interior filters, engine air filters, room air filters, compressed air filters, vacuum cleaner filters, cleanable filters, electrostatic precipitators, oil separators, cooling lubricant separators, wet scrubbers, cyclones and other separators
•    Isothermal and isobaric particle size and quantitative determination, for instance in the automobile, chemical, pharmaceutical and food industries
•    Analysis of fast, transient processes
•    Inspection of smoke detectors
•    Particle formation for cloud formation
•    Emission measurements
•    Immission measurements
•    Breathing function: Inhalation / Exhalation (Particle size and number)

Related products