The “2021 China Filter Industry Annual Conference— Innovation Development and Frontier Technology Summit Forum” was held in Suqian on October 28th. Palas®, the German aerosol technology expert was invited once again to participate in this annual event. Michael Wolf, Managing Director of Palas® China, was also present. Invited by the China Internal Combustion Engine Industry Association, he exchanged his knowledge with other experts in the industry. On stage, Linus Wang, Sales Unit Manager Industry & Science at Palas® China, shared valuable insights with the audience.
Advanced Measurements Technology for Higher Standards
Carbon neutrality and green sustainable development are vital topics and major goals across all industries as China’s Stage 6 emission standard for new light-duty vehicles is being gradually implemented. Also, the performance of various filters used in the modern automobile and internal combustion engines must meet higher demands. As the cleaning guardian of automobiles and internal combustion engines, filters are directly related to environmental pollution and air quality. This development in the filter industry was also reflected in the motto of the technology summit forum, “R&D core new technologies, seize market opportunities”. The experts from Palas® elaborated on the standard content of filter performance tests and the difference between different types of light scattering measurement equipment. They also introduced the technical advantages of the Palas® particle size spectrometer in the filtration performance test, which was received with great interest by the participants.
At the forum, Palas® focused on three main products: The MFP 3000 filter media test rig, the HMT 1000 heatable modular test system for oil mist separators, and the DFP 3000 compressed air filter test rig. Visitors could experience the Palas® aerosol generators, and particle size spectrometers live onsite. Experts, existing and potential customers also used the opportunity for a personal conversation with the team from Palas®.
The Palas® MFP 3000 ensure a precise and flexible measurement of fractional separation efficiency, dust holding capacity, and pressure drop in high and low aerosol concentrations. The test results provided by the pre-programmed measurement procedures with defined test parameters can be used for global comparisons. The HMT 1000 uses the isothermal particle measurement method for quick and accurate testing at temperatures up to 120°C. The advanced HMT 1000 test system, complying with the ISO 17536 standard, minimized errors in the measuring process. Thanks to the excellent correlation between the quantitative distribution measurement and the gravimetric analysis, very fast and volume-relevant testing of the oil mist separators is assured.
Palas® Advanced Technology for higher Efficiency of Filter Tests
In his well-acclaimed speech, Linus Wang, Sales Unit Manager Industry & Science at Palas® China, highlighted the topic “Test and Analysis on Performance of Filtration Material” giving a comprehensive overview over technical advantages and principles of Palas® products, application solutions, industry standards.
He also talked about test bench solutions for oil mist separators, compressed air, natural gas filters, and air filtration products based on core technologies. The provided data prove the superior performance and reliable test results of Palas® instruments. Linus Wang elaborated on how Palas® can support filter material testing with its strong technical support.
The China Filter Industry Annual Conference is a platform to showcase new technologies and nurtures knowledge exchange and cooperation between the participating experts. The conference has also been an excellent platform for Palas® to introduce the superior technology of its instruments to the industry, helping them improve their products with accurate testing.
Palas® MFP 3000 Filter Media Test Rig
Explore the modular filter media test rig for fractional efficiency, differential pressure, dust holding capacity and gravimetrical efficiency in suction mode. Version HF has the function of temperature and humidity control.
Benefits:
· Virtually simultaneous particle measurement in the raw gas and clean gas
· Particle size measurements from 0.2 – 40 µm
· Measurement of Cn max= 106 particles/cm3 without dilution
· Internationally comparable measurement results
· Widespread distribution of the measurement system
· High reproducibility of the testing method
· Easy use of different test aerosols, e.g. SAE Fine and Coarse, NaCl/KCl, DEHS
· Highest raw gas concentrations of up to > 70 mg/m3 (ISO Fine) or > 300 mg/m3 (ISO Coarse) with measurement of the fraction separation efficiency for burden tests
· Flexible filter test software FTControl
· Sequence programs for pressure loss measurements, measurements of fraction separation efficiency and burden measurements
· Easy to operate, even untrained personnel can be instructed quickly in the use of the equipment
· Short set-up times
· Cleaning and calibration can be performed autonomously by the customer
· Easy use of the measurement technology components – even in other applications
· Mobile setup, easy to move on castors
· Reliable operation
· Validation of the clear function of individual components and the overall system during pre-delivery acceptance testing and upon delivery
· Low-maintenance
· The unit will reduce your operating costs
Applications:
· For filter media and small filter elements
· Product development/ during production monitoring.
· Testing based on ISO 11155-1 / DIN 71460-1 (cabin air filters)
· Testing based on ISO 5011 (engine pre-air filters)
· Testing based on ISO 16890 (room air filters)
· Other standards in various versions
· Fully automatic measurement of the fractional efficiency, the pressure drop curve, the dust holding capacity and the gravimetrical efficiency
· International comparable results due to the high distribution of the system
HMT 1000 Heatable Modular Test System for Oil Mist Separators
Heatable modular test system for oil mist separators better as ISO 17536
Benefits:
· Measurement and evaluation of fraction separation efficiency and burden
· Isothermal and isobaric measurement
· All components can be heated to 120°C
· High reproducibility of the testing method
· Internationally comparable measurement results thanks to the widespread use of the measurement system
· Cleaning and calibration can be performed autonomously by the customer
· Easy to operate, even untrained personnel can be instructed quickly in the use of the equipment
· Modular layout offers increased flexibility
· Validation of the clear function of individual components and the overall system during pre-delivery acceptance testing and upon delivery
· Reliable operation
· Short set-up times, extremely low-maintenance
· The unit will reduce your operating costs
Palas® China will arrange a series of online webinars both in English and Chinese for Ambient air quality continuous monitoring system, Palas SMPS scanning mobility particle sizer, Palas Promo & Aerosol Generator & Dilution system, ISO 16890 filter media tester, Palas MFP 3000 G, ISO 29463-3 filter media tester, Palas MFP Nano plus 4000, ISO 17536 Fractional filtration efficiency tester of Oil Mist Separator, Palas HMT 1000, as well as Particle Distribution Measurement Devices Introduction – Optical Scattering Method and many other solutions. If interested in the webinars for our products, you are more than welcome to register on our official website and get the latest webinar plan!
Register online now to participate in our webinars if interested
