![\"\"](\"https:\/\/palas.com.cn\/en\/wp-content\/uploads\/2023\/02\/1-1-scaled.jpg\")
<\/p>\nMFP filter test rigs from Palas\u00ae have been widely recognized by university research teams, and Qingdao University is one of them. After the Palas\u00ae MFP 3000 G was praised by the College of Physics, the university\u2019s State Key Laboratory of Bio-Fibers and Eco-Textiles chose again the Palas\u00ae MFP Nano plus HEPA\/ULPA Filter Media Test Rig \u2014 thanks to its measurement of fraction separation efficiency in the 15 nm to 300 nm size range and accurate determination of most penetrating particle size (MPPS). Palas\u00ae will continue to help Qingdao University face the challenges of filtration tests and promote further scientific research in the future.<\/p>\n
<\/p>\n
Challenge of filtration tests for universities<\/strong><\/p>\n The State Key Laboratory of Bio-Fibers and Eco-Textiles is the driving force of the Shandong textile industry. When it comes to measuring the fraction separation efficiency and the MPPS of HEPA\/ULPA filters by following EN 1822-3, the laboratory encountered a challenge. Because the data provided by most filter media test rigs is based on the particle\u2019s mass concentration. It does not contain information on particle size, neither on MPPS. However, EN 1822-3 and ISO 29463-3 for HEPA\/ULPA filters both require the measurement of fraction separation efficiency, meaning the particle number-based filtration efficiency under different particle sizes. In addition, the scatter-light test rigs cannot measure the 100 nm-smaller particles, and the resolution of the particle size channel is relatively low. Normally, the MPPS of common air filter media range is between 30 nm and 300 nm, so only an instrument that can perform well within the core range can help the Qingdao University laboratory meet the challenge.<\/p>\n Palas\u00ae solution helps solve smoothly<\/strong><\/p>\n In response to the requirements from Qingdao University, Palas\u00ae arranged onsite inspection, timely communication and provided Palas\u00ae MFP Nano plus Filter Media Test Rig as solution. In accordance with EN 1822-3 and ISO 29463-3, the Palas\u00ae MFP Nano plus is equipped with U-SMPS for fraction separation efficiency test ranging from 15 nm to 300 nm. In addition, the MFP Nano plus provides up-to-42 particle size channels in that core size range with powerful Palas\u00ae hardware and software combination. This further enables accurate determination of the location of MPPS.<\/p>\n Palas\u00ae ‘s knowledge of HEPA\/ULPA filters and localized after-sales service add significant value to the Palas\u00ae MFP Nano plus Filter Media Test Rig. The state key laboratory of Qingdao University finally chose Palas\u00ae MFP Nano plus after consideration. The lab also recoginized the Palas\u00ae solution in the actual application process. Palas\u00ae will continue to provide proven and reliable solutions for HEPA\/ULPA filter filtration research.<\/p>\n Palas\u00ae MFP Nano plus HEPA\/ULPA Filter Media Test Rig<\/p>\n Advantages Applications Palas\u00ae will arrange a series of online webinars both in English and Chinese for Ambient air quality continuous monitoring system, SMPS scanning mobility particle size spectrometer, Promo\u00ae aerosol spectrometer, Aerosol generator and Dilution system, ISO 16890 filter media test rig-MFP 3000 G, ISO 29463-3 HEPA\/ULPA filter media test rig-MFP Nano plus 4000, ISO 17536 oil mist separator filtration performance test rig-HMT 1000, as well as many other aerosol measurement solutions. You are welcome to register for the conference and will be informed of the webinar information as soon as possible!<\/p>\n Topic: Filtration Performance Test of HEPA![\"\"](\"https:\/\/palas.com.cn\/en\/wp-content\/uploads\/2023\/02\/2-1.jpg\")
<\/p>\n![\"\"](\"https:\/\/palas.com.cn\/en\/wp-content\/uploads\/2023\/02\/3-scaled.jpg\")
<\/p>\n![\"\"](\"https:\/\/palas.com.cn\/en\/wp-content\/uploads\/2023\/02\/4.jpg\")
<\/p>\n![\"\"](\"https:\/\/palas.com.cn\/en\/wp-content\/uploads\/2023\/02\/5-scaled.jpg\")
\n<\/strong>
\nFilter media test rig in accordance to DIN EN 1822-3 and ISO 29463-3 for fraction separation efficiency and determination of MPPS of filter media.<\/p>\n
\n<\/strong>\u00b7\u00a0 \u00a0Particle size measurements from 10 nm
\n\u00b7\u00a0 \u00a0Internationally comparable measurement results in accordance with DIN EN 1822-3 and ISO 29463-3
\n\u00b7\u00a0 \u00a0Simple use of different test aerosols, such as NaCl or DEHS (others on request)
\n\u00b7\u00a0 \u00a0Easily movable dilution cascades with factors of 10, 100, 1,000 and 10,000 for measurements with salt or DEHS
\n\u00b7\u00a0 \u00a0Simple measurement of the fraction separation efficiency and determination of the MPPS range
\n\u00b7\u00a0 \u00a0High reproducibility of the testing method
\n\u00b7\u00a0 \u00a0Flexible filter test software FTControl
\n\u00b7\u00a0 \u00a0Easy to operate, even untrained personnel can be instructed quickly in the use of the equipment
\n\u00b7\u00a0 \u00a0Cleaning can be performed autonomously by the customer
\n\u00b7\u00a0 \u00a0Short set-up times
\n\u00b7\u00a0 \u00a0Validation of the clear function of individual components and the overall system during pre-delivery acceptance testing and upon delivery
\n\u00b7\u00a0 \u00a0Reliable operation
\n\u00b7\u00a0 \u00a0Low maintenance
\n\u00b7\u00a0 \u00a0The unit will reduce your operating costs<\/p>\n
\n<\/strong>\u00b7\u00a0 \u00a0For filter media and small filter elements
\n\u00b7\u00a0 \u00a0Product development and production control
\n\u00b7\u00a0 \u00a0Test possibilities with regard to EN 1882-3 (HEPA\/ULPA) and ISO 29463-3
\n\u00b7\u00a0 \u00a0Fractional efficiency measurement in the range from approx. 10 nm up to 800 nm<\/p>\n
\n<\/strong>Time: Friday, March 10, 2023 15: 00 – 16: 00<\/strong><\/p>\n