Description
A representative sample taking is one of the basic requirements to measure aerosols correctly with a high-quality aerosol spectrometer as e.g the welas® digital or the Promo® system. To have always a repeatable and representative sample taking, Palas® provides the sample taking system ISP 1000.
Important parameters for the sample taking are:
Important parameters for the sample taking are:
• Isokinetic suction with isokinetic inlet nozzles AIP
– The velocity at the inlet of the sample taking must be the same as the gas velocity at the point of sample taking to avoid a desmixing of the aerosol.
– The suction air flow for the welas® aerosol sensors is fixed, the inlet diameter for the isokintic aerosol sampling nozzle can be varied. Therefore Palas® offers a huge variety of different aerosol sampling nozzles AIP.
AIPs / Overview sampling probe points AIP for sampling probe volume flow of 5 l/min and standard sampling tube (stainless steel: inner diameter: 6 mm, outer diameter: 8 mm)
|
Description
|
For flow velocity in the duct
|
|---|---|
|
AIP 103
|
0.008 – 0.012 m/s
|
|
AIP 86
|
0.012 – 0.017 m/s
|
|
AIP 72
|
0.017 – 0.025 m/s
|
|
AIP 60
|
0.025 – 0.036 m/s
|
|
AIP 50
|
0.036 – 0.052 m/s
|
|
AIP 41
|
0.052 – 0.074 m/s
|
|
AIP 35
|
0.074 – 0.11 m/s
|
|
AIP 29
|
0.11 – 0.15 m/s
|
|
AIP 24
|
0.15 – 0.22 m/s
|
|
AIP 20
|
0.22 – 0.32 m/s
|
|
AIP 16.6
|
0.32 – 0.46 m/s
|
|
AIP 13.9
|
0.46 – 0.66 m/s
|
|
AIP 11.6
|
0.66 – 0.95 m/s
|
|
AIP 9.6
|
0.95 – 1.37 m/s
|
|
AIP 8.0
|
1.37 – 1.98 m/s
|
|
AIP 6.7
|
1.98 – 2.85 m/s
|
|
AIP 5.6
|
2.8 – 4.1 m/s
|
|
AIP 4.6
|
4.1 – 5.9 m/s
|
|
AIP 3.9
|
5.9 – 8.5 m/s
|
|
AIP 3.2
|
8.5 – 12 m/s
|
|
AIP 2.7
|
12 – 17.5 m/s
|
|
AIP 2.3
|
17.5 – 21 m/s
|
|
AIP 2.0
|
21 – 31 m/s
|