German aerosol measurement expert Palas® sincerely invites you to attend China International Metrology Measurement Technology and Equipment Exhibition 2022

Palas® will participate in China International Metrology Measurement Technology and Equipment Exhibition 2022 at Nanjing International Exhibition Center from September 7 to 9, 2022. At that time, Palas® will focus on promoting Palas® SMPS Scanning Mobility Particle Size Spectrometer, Promo® Series Aerosol Spectrometer, Charme® Aerosol Electrometer, New RBG Aerosol Generator, and MFP 3000 Series Modular Filter Media Filtration Performance Test Rig, etc. Welcome to visit and guide, Palas® will look forward to your arrival at booth 100-101!

First Look Hot Products

SMPS Scanning Mobility Particle Size Spectrometer

Benefits
·   Particle size distributions from 4 nm to 1,200nm
·   Continuous and fast-scanning principle of measurement
·   High resolution in up to 128 size classes/decade
·   Suitable for concentrations of up to108 particles/cm3
·   
Universally connects to DMAs and nanoparticle counters from other manufacturers
·   Graphic display of measurement values
·   Intuitive operation using 7″ touchscreen and GUI
·   Integrated data logger
·   Supports multiple interfaces and remote access

Applications
·   Filter test
·   Aerosol research
·   Environmental and climatic studies
·   Inhalation experiments
·   Interior and workplace measurements

Promo® Series Aerosol Spectrometer

Benefits
·   Measuring range of 0.2 to 100 μm (4 measuring ranges selectable in one device)
·   Up to four measuring ranges in only one device:
–  0,2 μm – 10 μm
–  0,3 μm – 17 μm
–  0,6 μm – 40 μm
–  2 μm– 100 μm (additionally for sensors 2300 and 2500)
·   Up to 128 size channels per measuring range
·   Concentration range of 1 particle/cm3 to 106 particles/cm3
·   
Calibration curves for different refractive indices
·   Very high and reproducible counting efficiency rate starting at 0.2 μm
·   Pressure resistance up to 10 bar (optional)
·   Can be heated up to 250°C (optional)
·   Optical fibre technology
·   Simple operation with a large touch display
·   Calibration, cleaning and lamp replacement can all be performed independently by the customer
·   External control by RS 232 or Ethernet
·   With analysis software PDAnalyze

Applications
·   Emission monitoring of installations
·   Control of grinding and classification processes
·   Monitoring of production processes in the food, pharmaceuticals and chemicals industries
·   Testing of complete filters, inertial and wet separators or electrostatic precipitators

Charme® Aerosol Electrometer

Benefits
·   Reliable current measurement (charge/time) for aerosols
·   Quick measurement (10 Hz) of the particle concentration
·   Intuitive operation using touch screen
·   Graphical display of measured values for particle concentration and electrometer current
·   Gravimetric filter that can be switched out for on-site correlation between the measured current and the mass concentration
·   Integrated pump
·   Integrated data logger
·   Low maintenance
·   Easy to operate
·   Reduces your operating expenses

Applications
·   Aerosol research
·   Environmental measurements (high concentrations)
·   Workplace measurements
·   Emission studies
·   Process control
·   Calibration of condensation particle counters (CPC)

New RBG Aerosol Generator

Benefits
·   Overpressure operation up to 10 bar
·   Wider Mass FLow Range
·   8 mg/3 stable mass concentration capacity
·   100 hours of continuous work
·   Remote control

Application
·   Test of cabin filter
·   Development of new filter and filter material
·   Calibration
·   Particle image velocimetry
·   Inhalation test
·   Mask check

MFP 3000 Series Modular Filter Media Filtration Performance Test Rig

Benefits
·   Virtually simultaneous particle measurement in the raw gas and clean gas
·   Particle size measurements from 0.2 – 40 µm
·   Measurement of Cn max= 106 particles/cm3 without dilution
·   Internationally comparable measurement results
·   Widespread distribution of the measurement system
·   High reproducibility of the testing method, means the consistency of the measurement results of different test rigs when measuring the same batch of samples is very good
·   Easy use of different test aerosols, e.g. SAE Fine and Coarse, NaCl/KCl, DEHS
·   Highest raw gas concentrations of up to > 1000 mg/m3 (ISO Fine) or > 5000 mg/m3 (ISO Coarse) with measurement of the fraction separation efficiency for burden tests
·   Flexible filter test software FTControl
·   Sequence programs for pressure loss measurements, measurements of fraction separation efficiency and burden measurements
·   Easy to operate, even untrained personnel can be instructed quickly in the use of the equipment
·   Short set-up times
·   Cleaning and calibration can be performed autonomously by the customer
·   Easy use of the measurement technology components – even in other applications
·   Mobile setup, easy to move on castors
·   Reliable operation
·   Validation of the clear function of individual components and the overall system during pre-delivery acceptance testing and upon delivery
·   Low-maintenance
·   The unit will reduce your operating costs

Application
·   For filter media and small filter elements
·   Product development and during production monitoring
·   Testing based on ISO 11155-1 / DIN 71460-1 (cabin air filters)
·   Testing based on ISO 5011 (engine pre-air filters)
·   Testing based on ISO 16890 (room air filters)
·   Other standards in various versions
·   Fully automatic measurement of the fractional efficiency, the pressure drop curve, the dust holding capacity and the gravimetrical efficiency
·   International comparable results due to the high distribution of the system

For more product information introduction, you are welcome to visit the Palas® booth 100-101 at Nanjing International Exhibition Center from September 7 to 9, 2022. We look forward to your arrival.

Palas® China will arrange a series of online webinars both in English and Chinese for Ambient air quality continuous automatic monitoring system, Palas® SMPS scanning mobility particle size spectrometer, Promo® spectrometer, Aerosol generator and Dilution system, ISO 16890 filter media test rig-Palas® MFP 3000 G, ISO 29463-3 filter media test rig-Palas® MFP Nano plus 4000, ISO 17536 Fractional filtration efficiency test rig of Oil Mist Separator-Palas® HMT 1000, as well as many other solutions of Particle distribution monitoring systems using light scattering method. You are welcome to register for the conference and be informed of the webinar information as soon as possible!

Click here to register now