Stainless steel version with heating for temperatures up to 250°C and humidity control
In this version, the filter holder MMTC 2000 EHF is made of V2A in order to cover a higher temperature range. The addition of heating and insulation allows filter testing at temperatures of up to 250°C.
In addition, the relative humidity can be controlled on this system up to 80% rel. humidity at a maximum temperature of 90°C.
| Volume flow | 1 – 5.5 m3/h (others on request, suction mode) |
|---|---|
| Power supply | 120/230 V, 2A (single phase connection) |
| Dimensions | approx. 1,200 • 630 • 1,700 mm (H • W • D) |
| Powder Disperser | RBG 2000 for non‐cohesive powders and bulks as e. g. Pural NF, Pural SB, ISO A2 fine, ISO A4 coarse, different types of TiO2 and other powders from practice Mass Flow: approx. 0.2 – 90 g/m³ (depending on powder size and density) |
| Inflow velocity | 3 – 8.8 cm/s (others on request) |
| Differential pressure measurement | 0 – 5,000 Pa |
| Test area of the medium | 177 cm2 |
| Aerosols | Dusts (e. g. SAE dusts) |
| Compressed air supply | 6 – 8 bar |
| Valve opening times | 50 – 500 ms |
| Pressure for pulse jet cleaning | Adjustable up to 6 barg |
| • Internationally comparable measurement results thanks to the widespread use of the MMTC 2000 measurement system
• High reproducibility of the testing method • Different dusts from real applications can be used • Quick and easy adjustment of the raw gas concentration • Simulation of the so-called garland effect • Suitable for in-situ measurements • Online measurements of the particle size and particle concentration with the light scattering spectrometer welas® digital • MMTC 2000 EHF: This test rig can be heated to 250°C; the relative humidity can be set to levels up to 80% (at a temperature of 90°C). • Lightweight, small and mobile design • Easy handling, easy cleaning • Quick set-up time when changing the filter or test dust • Validation of the clear function of individual components and the overall system during pre-delivery acceptance testing • Reliable operation • Short set-up times, extremely low-maintenance • The unit will reduce your operating costs |
| • Standardized test in accordance with VDI 3926
• Individual tests under close-to-real conditions as defined by the different process conditions, e.g. in the cement industry, in the wood-processing industry, the pharmaceutical industry, the chemical industry, in nuclear power plants and many other areas... |
