Follow us:

Products

Hotline
Download

welas® digital 1000 P

With automatic regulation of sampling volume flow by the aerosol sensors welas® under overpressure up to 10 bar

•    Three measuring ranges in only one device:
      -   0.2 µm – 10 µm
      -   0.3 µm – 17 µm
      -   0.6 µm – 40 µm
•    Up to 128 size channels per measuring range
•    Concentration range from < 1 particle/cm3 to 5 • 105 particles/cm3
•    Calibration curves for different refractive indices
•    Very high and reproducible counting efficiency rate starting at 0.2 µm
•    High temporal resolution down to 10 ms
•    Extensive PDControl and FTControl software
•    Strong, powerful external suction pump ASP 1000
•    Calibration, cleaning and lamp replacement can all be performed independently by the customer
•    Simple operation
•    Low maintenance
•    Reliable function
•    Reduces your operating expenses

Description

Depending on the composition of the aerosol to be measured, i.e. the carrier gas component and the particle material, pressure changes in the carrier gas can significantly influence the particle size distribution, e.g. due to condensation or evaporation.

For this reason, the welas® aerosol sensors welas® 1100 P and welas® 1200 P are equipped with a pressure-tight cuvette to ensure isobaric and isothermal sampling into the sensor’s measurement volume.

The welas® digital is usually calibrated for the operating volume flow. As the operating volume flow changes with pressure, it is advantageous for the user if automatic volume flow regulation for the sampling volume flow is provided for in the device.

In the welas® 1000 P the pressure of the carrier gas is measured and the required operating volume flow is automatically set to 5 l/min.

Includes:
•    Mass flow controller for volume flow regulation
•    Absolute pressure capsule
•    Filter unit

Datasheet

Interfaces

USB
Measurement range (size)

0.2 – 10 µm,
0.3 – 17 µm,
0.6 – 40 µm
Size channels

up to 64/decade
Measuring principle

Optical light-scattering
Measurement range (number CN)

< 5 • 105 particles/cm3
Time resolution

≥ 10 ms
Thermodynamic conditions

10 – 40 °C, ≤ 10 bar
Volume flow

5 l/min, 1.6 l/min regulated by mass flow
Data acquisition

20 MHz processor, 256 raw data channels, digital
Light source

Xenon high pressure lamp
75 W
User interface

Laptop
Power supply

115 – 230 V, 50 – 60 Hz
Housing

Table housing, optionally with mounting brackets for rack-mounting
Dimensions

185 • 450 • 315 mm (H • W • D) (19")
Weight

approx. 8 kg (control unit), approx. 18 kg (sensor)
Software

PDControl, FTControl
Installation conditions

+5 – +40 °C (control unit)

Benefits

•    Three measuring ranges in only one device:
      -   0.2 µm – 10 µm
      -   0.3 µm – 17 µm
      -   0.6 µm – 40 µm
•    Up to 128 size channels per measuring range
•    Concentration range from < 1 particle/cm3 to 5 • 105 particles/cm3
•    Calibration curves for different refractive indices
•    Very high and reproducible counting efficiency rate starting at 0.2 µm
•    High temporal resolution down to 10 ms
•    Extensive PDControl and FTControl software
•    Strong, powerful external suction pump ASP 1000
•    Calibration, cleaning and lamp replacement can all be performed independently by the customer
•    Simple operation
•    Low maintenance
•    Reliable function
•    Reduces your operating expenses

Applications

•    Determination of the separation efficiency of car interior filters, engine air filters, room air filters, compressed air filters, vacuum cleaner filters, cleanable filters, electrostatic precipitators, oil separators, cooling lubricant separators, wet scrubbers, cyclones and other separators
•    Isothermal and isobaric particle size and quantitative determination, for instance in the automobile, chemical, pharmaceutical and food industries
•    Analysis of fast, transient processes
•    Inspection of smoke detectors
•    Particle formation for cloud formation
•    Emission measurements
•    Immission measurements

Related products